Hello everyone! My Chinese name is "离心管" (centrifuge tube), and my English name is "Centrifugal tube”。
Today I'd like to give you a detailed introduction. We centrifuge tubes are also a big family. Because we have different roles, we also come in different materials, different volumes, different appearances, and so on.
Different experiments require the cooperation of different members of our family. Our screw caps close in different ways, and their functions differ greatly. The choice of material also involves a lot of knowledge. After hearing this, don't you feel that you previously knew too little about us...
No1, by volume:
Conventional centrifuge tubes (50mL, 15mL)
Micro centrifuge tubes (2mL, 1.5mL, 0.6mL)
No2, by shape:
Conical centrifuge tubes—with a conical bottom
Round-bottom centrifuge tubes—with a round bottom
No3, by material:
Plastic centrifuge tubes—common materials include polyethylene (PE), polycarbonate (PC), polypropylene (PP), etc.
Glass centrifuge tubes—when using glass tubes, the centrifugal force should not be too high, and a rubber pad is needed to prevent the tubes from breaking
Steel centrifuge tubes—steel centrifuge tubes are strong, do not deform, and resist heat, freezing, and chemical corrosion
No4, by cap closure method:
Snap-cap centrifuge tubes, which are sealed by pressing, commonly found in microcentrifuge tubes
Screw-cap centrifuge tubes, which can be further divided into flat caps (the top of the cap is flat) and plug caps (the top of the cap has a plug shape)
According to various experimental needs, you can choose different members of our family to cooperate with you and support your work!
I have been very widely used in the field of biological sciences, especially in biochemistry and molecular biology research. Every biochemistry and molecular biology laboratory needs centrifuge tubes.
Suzhou CellPro Biotechnology conventional centrifuge tubes are made of high-quality imported polypropylene (PP) material that is resistant to high temperature and high pressure. The tube caps are made of high-density polyethylene (HDPE), and can be provided in bag packaging or rack packaging, meeting basic experimental requirements and providing good quality to ensure the safety of samples and users.Suitable for the collection, aliquoting, and centrifugation of various biological samples such as bacteria, cells, proteins, and nucleic acids, and compatible with centrifuges from multiple brands.
Product Features
1. Excellent material
Produced with imported polypropylene (PP) ;DNase-free, RNase-free, non-pyrogenic;Temperature range: -80℃ ~121℃;RCF: 12000xg
2. Easy identification
Clear black graduation lines and a writable white area
3. Safe and sterile
Electron beam sterilization, providing good quality to ensure the safety of samples and users
4. Convenient operation
Can be operated with one hand, easy to suspend the tube cap, good sealing performance
Cellpro Biology Micro Centrifuge Tubes are made of imported PP material that meets USP Class VI standards.Widely used in various experimental operations, meeting bioanalytical grade requirements,High transparency for easy sample observation.Suitable for the collection, aliquoting, and centrifugation of various biological samples such as bacteria, cells, proteins, and nucleic acids, and compatible with centrifuges from multiple brands.
1. Excellent material
Made of imported PP material meeting USP Class VI standards, DNase-free, RNase-free, pyrogen-free, temperature range: -80℃~121℃; RCF: 14000xg;Endotoxin content <0.1EU
2. Easy identification
Frosted area for easy marking and writing, with clear and accurate graduation lines on the tube body
3. Safe and sterile
Electron beam sterilization, providing good quality to ensure the safety of samples and users
4. Convenient operation
Easy-to-pierce cap design,Can be opened and closed with one hand,Comfortable feel when opening the cap,Tight sealing
Operating steps
Since graduated centrifuge tubes are measuring-in instruments, they must be cleaned and dried before use.
2. When reading, be sure to observe the meniscus correctly, otherwise certain errors will be introduced.
3. When using, the number of centrifuge tubes should be determined according to the model of the centrifuge. If a centrifuge with double tube sleeves is used for a single tube test, the same volume of liquid must be placed in the other centrifuge tube to maintain balance.
4. Centrifuge tubes need to be compatible with the centrifuge. According to the centrifuge configuration, use centrifuge tubes of appropriate length and diameter.
5. After the centrifuge tubes are inserted into the centrifuge sleeves for layered separation, when stopping rotation, let it stop naturally. Never use external force to force it to stop.
Precautions
When using centrifuge tubes, do not use a single tube multiple times. Pay attention to sample evaporation and leakage of some radioactive or highly corrosive samples; during storage, they must be sealed well;
Prevent deformation of centrifuge tubes during use.
1. Do not place any objects on the centrifuge lid. After each use, be sure to clean the inner chamber and rotor.
2. If the high-speed microcentrifuge has not been used for a long time, open the centrifuge lid for a period of time before use to dry the inner chamber.

In addition, I also bring you the benefit of sample trials. You can scan and click the image below to go to the mini program and apply for a sample trial~
Quality Assurance
Suzhou CellPro Biotechnology has two major platforms: a multi-cavity high-efficiency mold R&D platform and a quality control and application verification platform.A high-precision mold R&D and production workshop and a professional mold team ensure professional and efficient mold development capabilities.。
It has Class 100,000 cleanrooms and Class 10,000 cleanrooms, fully imported electric injection molding machines such as FANUC and TOYO, and introduces GMP standards in the production and R&D process to ensure product quality.
The Applied Technology Development Center has set up biological experiment areas with multiple functions and possesses independent experimental technology development capabilities, enabling full-process evaluation, verification, and integrated development of consumables, reagents, and instruments.
Company Qualifications






Back to list



