Cell cryopreservation refers to placing cells in a low-temperature environment to reduce cell metabolism, thereby achieving the purpose of long-term storage and seed preservation of cells for subsequent experiments or clinical use.
Schematic diagram of the cell cryopreservation process
At present, the main technology for cell cryopreservation is liquid nitrogen freezing. In the actual cryopreservation process, gradient temperature freezing is required, and an appropriate amount of protective agent must be added to ensure that the water inside and outside the cells will not form ice crystals and cause cell damage or death.
When can cells be cryopreserved
Before preparing target cells for freezing, it is necessary to ensure that the cells are in the optimal growth state, which can be observed through the following indicators:
Color and turbidity of the culture medium
The color of the culture medium can indicate whether the cells are overgrown (for example, if the cells are yellow, it means they are overgrown); the turbidity of the medium usually indicates contamination and is not suitable for freezing.
Generally, it is recommended to freeze newly recovered cells for about two weeks. If the cells are continuously cultured for more than two months, some changes in trait rate will occur, and the cells at this time are not suitable for freezing.
During the cryopreservation process,the optimal concentration of cells per cryopreservation tube is 5x10^6 cells/ml—1x10^7 cells/ml, and high or low density has a certain impact on cell survival rate. When the number of cells is insufficient, it is not recommended to freeze the cells.
What pretreatment is needed before cell cryopreservation
After the cells are digested and centrifuged, the supernatant is removed and the cell pellet is collected. They usually need to be resuspended in cryopreservation solution and transferred to cryopreservation tubes. The cryopreservation solution generally contains penetrating protective solutions such as glycerol or 10% dimethyl sulfoxide (DMSO) and 10%-90% fetal bovine serum.
The main component inside and outside cells is water. If cells are directly frozen without protective solution, the water inside and outside the cells will condense into ice crystals, causing endogenous mechanical damage to the cells. Cell dehydration caused by water condensation inside the cells will also cause changes in intracellular pH, protein denaturation, loss of function of internal organelles, and even DNA damage in the nucleus, ultimately possibly leading to cell death.
Cryopreservation solutions are often easily soluble small-molecule substances with cell permeability. They can pass through the cell membrane, enter the cells, lower the freezing point, and at the same time increase the permeability of the cell membrane to water, allowing intracellular water to exude outside the cells, thereby reducing the formation of intracellular ice crystals.
*For some special cells, such as primary skin cells, surface protective agents such as trehalose are additionally added to improve cell survival rate.
*Because DMSO has no toxic effect on most cells, it is widely used in cell cryopreservation; for some cells, some cells are sensitive to the toxicity of dimethyl sulfoxide, and glycerol can be used as a cryoprotectant.
Another main component of cryopreservation solution is fetal bovine serum. Because cell metabolism during cryopreservation is still very weak, adding serum to the cryopreservation solution can provide nutrients for the cells. At the same time, serum-rich proteins and other macromolecular substances can better protect the cells. Experiments have shown that a high proportion of serum in cryopreservation solution is beneficial to improving cell viability. Therefore, 90% serum plus 10% protective solution can be used for cell preservation during freezing. For common easy-to-culture cell lines, 10%-20% serum plus a certain amount of complete medium and DMSO can also preserve cells well.
What is the cooling process of cell cryopreservation
The cell cryopreservation process is a gradient cooling process, and liquid nitrogen is the best freezing medium for final cell preservation. The temperature of liquid nitrogen can be as low as -196°C. Under such low-temperature conditions, cell preservation is theoretically permanent.
The slow freezing process can allow intracellular water to exude from the cells before freezing to form ice crystals, so gradient cooling can greatly reduce damage to cells during the cooling process. At present, the commonly used gradient cooling methods in laboratories are as follows:
Traditional manual cooling method
Place the cryopreservation tube at 4°C for 10 min → -20°C for 30 min → -80°C for 16-18 hours (or overnight, with the longest storage time not exceeding one month) → transfer to liquid nitrogen for long-term storage.
*The time cells are placed at 4°C and -20°C should not be too long, and when transferring from 4°C to -20°C, it is best to invert and mix the cells to prevent a large number of cells from settling and accumulating at the bottom of the tube, which would affect cell recovery.
With the help of tools such as freezing containers and cell freezing instruments
Use medium characteristics or cooling programs for independent gradient cooling:
Place the cryovial into the cell freezing container (the container must be pre-cooled to 4°C in advance, and check whether isopropanol or other liquid inside is sufficient), then place it in a -80°C freezer for 16-18 hours (or overnight; the maximum storage time should not exceed one month) → transfer it to liquid nitrogen for long-term storage.
Place the cryopreservation tube into the cryoscope and lower the temperature to -100°C at a cooling rate of 1-2°C/min → transfer it to liquid nitrogen for long-term storage
Safety tips for using liquid nitrogen tanks
Liquid nitrogen is liquefied nitrogen gas and is a commonly used cryogenic storage medium in life science research and the pharmaceutical industry. It has the following physical and chemical properties:
01
Ultra-low temperature: The boiling point of liquid nitrogen is -195.8, and each kilogram of liquid nitrogen can absorb 48 kcal of heat when it vaporizes;
02
Colorless, odorless, and non-toxic liquid;
03
Asphyxiating: Nitrogen itself cannot cause suffocation, but in a confined space, if there is too much nitrogen and oxygen is displaced, the operator may also suffocate.
Therefore, when operating liquid nitrogen tanks, the following safety usage guidelines should be noted:
Prevent frostbite. Although its permeability is very weak, human skin will suffer severe frostbite when it comes into contact with liquid nitrogen. When placing cells, be sure to wear thick gloves, goggles, and a lab coat;
Operate gently to prevent liquid nitrogen from splashing;
Operate as quickly as possible. Because liquid nitrogen rapidly absorbs heat and vaporizes in air, to avoid temperature changes affecting sample quality, operations should be completed as quickly as possible;
Maintain properly. Regularly check the remaining liquid nitrogen to ensure the liquid level in the tank covers important samples; at a minimum, the liquid nitrogen must not be less than one-third of the tank volume.