3200威尼斯vip(中国)有限公司

News
NEWS
Home News Industry News
How can we grasp the key to qPCR data analysis?
2024-04-02

The success of a qPCR experiment depends on whether the data of each group meet the judgment criteria and whether they conform to the experimental expectations.A small qPCR experiment can become very simple or very complex. How to grasp the key to qPCR data analysis is the first step in analyzing the credibility of qPCR results.


qPCR data analysis mainly uses Cq values for calculation, so we need to understand several important parameters in the qPCR reaction and evaluate the experiment based on the performance of the parameters:


Amplification curve:Figure 1 reflects the relationship between the logarithm of the change in fluorescence signal and the number of qPCR reaction cycles. Figure 2 reflects the change in the corresponding fluorescence signal as the qPCR reaction proceeds. It is more intuitive, but the exponential phase is very short. A standard amplification curve shows an "S" shape and has a characteristic form: first the background signal, then three growth phases (exponential growth phase, linear growth phase, and plateau phase).


Figure 1: Logarithmic plot of the amplification curve.

Figure 2: Linear plot of the amplification curve.


Baseline:Usually, during cycles 3-15, the fluorescence signal changes little and the trend is close to a straight line, that is, the horizontal part of the amplification curve. Such a straight line is the baseline. In the same reaction, baselines need to be set separately for different genes.


Threshold:It is a fluorescence intensity value. The straight line passing through the threshold and parallel to the X-axis is called the threshold line. The automatic setting is 10 times the standard deviation of the fluorescence signal from cycles 3-15. Manual setting is placed in the exponential amplification phase, where the obvious increase in fluorescence signal can just be clearly seen. In the same reaction, thresholds can be set separately for different genes, but the same threshold must be used for amplification of the same gene.


Cq value:During the qPCR amplification process, the number of amplification cycles that have passed when the fluorescence signal of the amplification product reaches the set threshold has a linear relationship with the logarithm of the initial concentration. For quantitative analysis, Cq: 15-35 is generally used; too large or too small will lead to inaccurate quantification.


Figure 3: Amplification curve.


1. Amplification efficiency and correlation coefficient

In order to correctly evaluate PCR amplification efficiency, at least 3 parallel replicates are required, and at least a 5-log (5 logs) continuous gradient dilution of template concentration is required. When the amplification efficiency E is between 90-110%, amplification is considered close to the ideal situation.


R² value: Another key parameter for evaluating PCR efficiency. It is a statistical term that describes the degree of correlation between two values. If R² equals 1, then the Y value (Cq) can be used to accurately predict the X value (initial template amount). Conversely, if R² equals 0, the X value cannot be predicted from the Y value. It is generally believed that when the R² value of the standard curve is greater than 0.98, the credibility of the correlation between the two values is good.


Figure 4: Standard curve.


2. Repeatability

Repeatability refers to precision, reflecting how close multiple measured values are to one another. Standard deviation (the square root of the variance) is the most commonly used measure of precision. If many data points are close to the mean, the standard deviation is small; if many data points are far from the mean, the standard deviation is large.


For example, assuming the PCR reaction efficiency is 100%, then the average Cq interval between 2-fold dilution points should be exactly 1 Cq value. To distinguish 2-fold dilution concentrations with a 99.7% probability, the standard deviation must be less than or equal to 0.167. To distinguish 2-fold dilution in more than 95% of cases, the standard deviation must be less than or equal to 0.250. Overall, a standard deviation of no more than 0.2 among replicate wells indicates good experimental repeatability.


Figure 5: Amplification curves of 8 replicate wells.


3. Reproducibility

Refers to the variation in qPCR results between different batches or different laboratories, usually expressed as the SD or CV of copy number or Cq value.


Figure 6: GAPDH detected on 4 independent instruments, Cq = 20.11, SD = 0.002.


4. Sensitivity

Analytical sensitivity refers to the minimum copy number in a sample that can be accurately measured through the experiment, while clinical sensitivity refers to the percentage of patients with a specific disease who are determined to be positive by the test.Sensitivity is the limit of detection (LOD), that is, the concentration that can be determined and reasonably detected (usually using a 95% probability) in a given analytical procedure. The minimum detection limit can be determined by gradient dilution of the sample. The theoretical minimum LOD is 3 copy/aliquot, which is caused by sampling error following a Poisson distribution. Assuming conformity to a Poisson distribution, there is a 95% probability that PCR contains and detects at least 1 copy.


Figure 7: Detection of dynamic range across 5 orders of magnitude.


5. Accuracy

Reflects how close the measured value is to the true value, estimated as fold change or copy number.


6. Specificity

Refers to the ability in qPCR experiments to detect only the target gene, with primers specifically amplifying the target sequence without amplifying other gene sequences.This can be determined by checking whether the amplification product appears as a single band via gel electrophoresis, or by qPCR reaction based on whether the melting curve has a single peak.


Share to:
Products
Cell Biology
Molecular Biology
Liquid Handling
Bioprocessing
Custom Products
Solutions
Biopharmaceuticals
Cell & Gene Therapy
Vaccines
Diagnostics & Testing
About Us
Company Profile
Corporate Culture
Development History
Honors & Qualifications
Contact Us
Service Hotline: 400-800-6815
Email: info@cellprobio.net
Address: Building 40, No. 18 Dongchang Road, Suzhou Industrial Park
[WeChat Account QR Code]
Copyright © 2023 Suzhou CellPro Biotechnology Co., Ltd. All rights reserved. Record No.:Su ICP No. 19059453-1
Baidu
sogou