After taking so many nucleic acid tests
Have any of you ever been the "tube leader"?
As for the liquid in the nucleic acid sampling tube
I wonder if you, sitting in front of the screen, are curious?
What exactly is its purpose?
Why is it red?
What is the red liquid in the nucleic acid tube?
What is its purpose?
The red liquid in the nucleic acid sampling tube is called viral nucleic acid preservation solution。
Guanidine salt,It is one of the important components of the viral nucleic acid preservation solution. Guanidine is a very strong monobasic base, with alkalinity similar to sodium hydroxide. It can absorb carbon dioxide in the air to form carbonate. Guanidine is unstable under alkaline conditions and easily hydrolyzes into ammonia and urea. It is relatively stable under acidic conditions, so it is generally made into guanidine salt for preservation. Commonly used guanidine salts include guanidine isothiocyanate or guanidine hydrochloride, etc.
Guanidine salt is a commonly used protein denaturant. It can destroy the viral surface protein shell, thereby exposing the nucleic acid to be tested.
Since guanidine salt will eventually hydrolyze into ammonia and urea in aqueous solution, and ammonia will be converted into urea under liver metabolism, the toxicity of guanidine salt can basically be considered equivalent to that of urea.
And excess urea in our body will be excreted in urine through the kidneys.
The preservation solution also contains a certain amount ofDiazolidinyl urea,Because it has a certain bactericidal and bacteriostatic effect, it is usually used as a preservative. It is also added to some of the facial masks and lotions we commonly use.Low-dose contact carries basically no risk. If it accidentally gets on the skin, there is no need to worry too much; just wash it off with clean water.。
As for why the preservation solution is red?
Because a reagent called phenol red is added to it
Phenol red is an acid-base indicator.In a neutral environment it is red, in alkaline conditions it turns purple, and in acidic conditions it is yellow。If the preservation solution is contaminated by bacteria (commonly seen when the preservation solution has expired or the sample carries bacteria), the pH of the liquid drops, and it will change from red to yellow.
In addition, the inorganic salts in the nucleic acid preservation solution can maintain a relatively stable pH; the nutrients in it will ensure that the viral nucleic acid will not degrade in a short period of time.
At this point, we can basically understand clearly
The main function of the "red water"
is
to inactivate the virus
Sterilization and bacteriostasis
as well as
ensuring the stability of nucleic acids
In short,the ultimate purpose of nucleic acid preservation solution is to properly preserve the nucleic acids in test samples and detect viruses in a timely manner。
In addition, the red color of the nucleic acid test liquid is intentional,it isto provide a striking visual cue and distinction。A colorless and transparent liquid would also work, but red is more eye-catching.
So what if
someone really accidentally
pours the nucleic acid test liquid, which looks like raspberry juice,
into their mouth?
If accidentally ingested, seek medical attention at a professional medical institution promptly, because the nucleic acid test liquid contains buffer solution and some chemical components. If accidental ingestion is discovered, be sure to go to the hospital for treatment immediately.
How is the transportation safety of nucleic acidtest tubes ensured?
Where do they ultimately go?
After sample collection is completed, the nucleic acid sample preservation tubes will be immediately placed into sealed bags, then into yellow medical bags, and finally uniformly packed intodedicated biosafety transport boxes。
The boxes are equipped with ice packs to ensure the test samples are kept at a low temperature of 4 degrees Celsius. Becausethe lower the temperature, the more stable the nucleic acid。
With the "dual insurance" of "low-temperature protection" and "nucleic acid preservation solution," the accuracy of laboratory test results can be well guaranteed.
Regarding transport timing, according to national unified standards, in principle samples are collected every 2 hours for transport,andit is ensured that samples are delivered to the laboratory within three hours after collection to begin testing。
After nucleic acid testing is completed, the samples are sealed and disinfected, and transported by dedicated personnel in dedicated vehicles in a closed manner to the terminal treatment plant, with the entire transport process being safe and pollution-free. Generally, tubes or specimens with negative nucleic acid preservation solution are centrally collected and processed by professional companies in accordance with medical waste treatment standards. Positive specimens need to be autoclaved at high pressure before being treated as general medical waste.
After reading this article, I believe everyone
has a further understanding of the "red liquid"
In the future, when you are the "tube leader," be careful to protect the nucleic acid tube
and save the busy "dabai" workers some worry!
Disclaimer
This WeChat image and information come from Hunan Provincial Hospital of Traditional Chinese Medicine, Sichuan Observer, Tianjin Science Popularization Talk, Science Popularization Guangzhou, the official website of the National Health Commission, and others. The purpose is to share better content with more people, and the copyright remains with the original authors.
If there is any infringement involved, please inform us, and we will delete the relevant content within 24 hours. Thank you!






Back to list



